General
Weight – Approx 36,000 kg (79,000lb)
Width – 3m (9.8ft)
Height – 4.2m (13.8ft)
Length in Travel - 15.4m (50.5ft)
Length in Operation - 23.4m (76.6ft)
Controls – Remote Wireless Radio
Drum Drive Type – Closed Loop Hydraulics
Rotor Disc Drive –Eight Row C Section Vee Belt
|
Power Unit
Engine – Cummins QSX15
Rating - 418kW (560hp)
Engine Cooling – Radiator with hydraulic reversible fan
Fan Intake Area - 7.2 sq m (77.5 sq ft)
Clutch – PT Tech Wet Multiple Disc
Diesel Fuel Tank Capacity - 1,460L (385.8 gallons)
Hydraulic Fluid Tank - 620 L (163.8 gallons)
Shut down – water level, temperature, oil pressure
|
Feed System
Infeed Type – Steel Tipping Bin
Infeed Tray – 4.3m x 2.1m x 0.5m (14.2ft x 6.9ft x 1.6ft)
Infeed Height – 2.9m (9.5ft)
Outfeed Type – Pivoting Conveyor
Outfeed Belt Width – 1200mm (4ft)
Adjustable Discharge Height 5 to 6m (16.4 to 19.6ft)
|
Options
Caterpillar or Electric Motor
Tracked, In-Situ
Outfeed Magnet
Exhaust Heated Drum
|
Rotor & Teeth
Rotor Disc Diameter – 2m (6.6ft)
Number of Teeth – 54
Teeth Type – Reversible, Rebuildable
Working Edge – Tungsten Insert / Impregnated Hard Facing
|
Drum & Screening
Internal Drum Diameter – 2.4m (7.9ft)
Drum Length – 5.4m (17.7ft)
Screening Type – Interchangeable Screens (20-120mm)
|
If the WoodWeta 560 is larger than your requirements, the WoodWeta 330hp machine will produce 30 to 40 cubic metres (1060 to 1415 cubic feet) per hour or up to 40 tonnes (44 US tons) per hour, depending on product and size. This machine can be towed by a 6 wheeler truck.
Optimum Product - unique design and easily interchangeable grates ensure that optimum product is produced in consistent size. Optional dirt wear can separate unwanted fines from white wood.
One pass - no need to waste time pre splitting or rescreening your product. The WoodWeta can process any material from 1 metre stumps through to twigs in one single pass.
No difficult material - no need to separate out fibrous plants, such as palm trees, rubber trees or flax. These can be processed along with any other wood or green waste. The WoodWeta also easily processes materials such as fillet wood or reject laminated board.
High production - high speed rotor and low speed screens give optimum production output. Depending on product size, the WoodWeta 560 produces 200 cubic metres (7000 cubic feet) per hour or up to 100 tonnes (110 US tons) per hour.
Low wear - large surface screen area separates out fines and material already to size, so only material that needs shredding will contact the screens, rotor and teeth, reducing wear.
Low maintenance - patented tooth design allows teeth to be easily reversed or replaced, reducing downtime.
Low fuel consumption - large slew drum bearing reduces draw on the engine, giving fuel savings. Vertical Plane Rotor design ensures maximum contact with minimum drag.
Safe and quiet - with no projectiles and lower sound decibels, the WoodWeta can operate in urban areas with these restrictions.
Large outfeed conveyer - 1200mm (4 ft) belt allows low belt speed and less wear. Adjustable discharge height of 5 to 6.1m (16.4 to 20ft) allows filling of bin trucks or large piles.
Transport options - WoodWeta designs allow either towing by tractor unit or pintle hook to suit your machinery. A ring feeder system is also available as an optional extra.
Newsletter Signup >